The watch I requested for disassembly and cleaning this time was an Omega Speedmaster triple calendar watch.
When we inspected the machine, we found that it had run out of oil and needed to be disassembled and cleaned. I installed it because the hour hand had come off.
The spring bars on the 12 o'clock and 6 o'clock sides were bent, and the 6 o'clock spring bar was stuck to the end piece and could not be removed, so I removed the sticking and replaced the two spring bars.
The switching presser spring was worn out, so I replaced it. Also, the rotor was a little loose, so I re-swaged it.
The clasp slide screw, which is a part of the clasp, was missing, so I installed it.
It has been refinished and is in very good condition.
| movement | automatic winding |
| Model number (Ref) | 175.0084 |
| Cal.No. | 1151 |
| Years of use | 18 years |
| Consultation symptoms | The request was to disassemble it for cleaning and give it a new finish. |
| Repair details | Disassembly and cleaning 38,500 yen New finish 22,000 yen Switching presser spring replacement 4,400 yen Rotor re-caulking 4,400 yen Clasp slide screw installation 2,200 yen Spring bar x 2 (general purpose product) replacement service Spring bar removal (1 location) repair 3,300 yen |
| repair cost | 74,800 yen (tax included) |
| Repair period | about 5 weeks |
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
| model name | Regular basic price (tax included) | Our basic price (tax included) |
|---|---|---|
| Quartz (3-hand) Seamaster Constellation | 57,200 yen | 25,000 yen |
| Quartz (chronograph) | 63,800 yen | 38,500 yen |
| Automatic winding (3 hands) Seamaster, Constellation | 70,400 yen | 55,000 yen |
| Automatic winding (chronograph) Speedmaster, Seamaster | 95,700 yen | 38,500 yen |
| Manual winding (chronograph) Speedmaster, Seamaster | 95,700 yen | 38,500 yen |
*The above price is the basic price for overhaul. If replacement parts are required, they will be charged separately.
Disassembly and cleaning (for overhaul requests)
-------------About the request process----------------
1.If you make a request at our storepacking kitWe will send it to you from our store.
When your watch arrives, please pack it up and send it by courier.
2.Once the item has arrived at our store, we will notify you by email.
3. We will normally contact you with a formal estimate within 5 business days (about 1 week).
We will proceed with the repair after the estimate is approved.
If you cancel, you will only be responsible for the return shipping fee.
There is no estimate cancellation fee.Please rest assured.
4. Repair period is approximatelyAround 3-4 weeksIt becomes.
Watch Nanapure Rakuten Market store disassembly and cleaning listhere
Watch Nanapure PayPay Mall store disassembly and cleaning listhere
Watch Nanapure Yahoo store disassembly and cleaning listhere
Review submission benefits
After the repair is completed and you receive the product, please post a product review as a review bonus.
We will extend the normal 6 month warranty to 1 year. We also include a ``watch chart'' that shows the condition of the watch.
We accept consultations before repairs on LINE.
Refused at another storeBut,Is it possible to repair?、How much does it cost?Our staff with specialized knowledge will assist you.
Please feel free to contact us regarding even the smallest matters.
Click here for other repair examples
Examples of actual overhauls (disassembly and cleaning) performed at our store
We have listed the work details and costs, so we hope you will find this helpful when requesting an overhaul.
List of Rolex repair cases
Omega repair case list
Tag Heuer repair case list
List of repair cases of other brands