Even with radio-controlled clocks that automatically adjust the time and date, the time and date may be incorrect.
Why are the times and dates incorrect?
Even with radio-controlled clocks that automatically adjust the time and date, the time and date may be incorrect.
Radio-controlled clocks have the advantage of automatically setting the correct time, but the date and time can sometimes be incorrect due to magnetic interference or shock.
If this happens, even if you receive radio waves, the time will not be accurate.
We also often receive requests for repairs because they think their watches are broken.
But don't worry. Although the possibility of failure is not zero, in most cases,Improvements can often be seen with settings.It is.
There are instructions on how to set it up in the manual, but even after looking at it, it's hard to understand what to do.😭
If the time lags, the first thing to do is charge it.
The operating instructions differ depending on the manufacturer, but the steps you need to take are basically the same.
Please charge the battery first.If possible, leave it in sunlight for a little longer, about 2 days.
The reason why you need to charge it is because it consumes a lot of power to configure settings.
Please charge the battery first as it may run out of charge during the setup process.
Could you please confirm the setting and confirmation of the reference position?
Once charging is complete, adjust the date and time reference positions.Reference position for every radio clockThere is.
For example, if this reference position is off by 5 minutes, the time will be off by 5 minutes even if radio waves are successfully received.
Also, even if you manually set the time, it will be off by 5 minutes when receiving radio waves.
The method of adjusting the reference position differs depending on the manufacturer.
Could you please refer to the attached instruction manual?
Please refer to the instruction manual and check that the reference position is correct.
Depending on your watch, you may need to reset the system to set the reference position.
Check the time difference (city/world time) settings
Once you have finished correcting the reference position, you will need to set the time difference.
Countries other than JapanIf it is set to , you will not be able to receive radio waves.
Could you please make sure to set the time difference to Japan?
*Depending on the manual of the watch, the time difference setting may be described as world time or home time.
*If your watch is a domestic model, you can ignore this setting.
Perform forced (manual) radio wave reception
If the date and time do not match even after receiving radio waves,Failed to receiveThere is a possibility.
After reception, check whether radio waves were successfully received.Reception resultPlease check.
If you are unable to receive radio waves, we recommend trying it in a different environment, such as outdoors, or at night when there is less noise in your daily life.