Even with radio-controlled clocks that automatically adjust the time and date, the time and date may be incorrect.
Why are the times and dates incorrect?
Radio-controlled clocks have the advantage of automatically setting the correct time, but the date and time can sometimes be incorrect due to magnetic interference or shock.
If this happens, even if you receive radio waves, the time will not be accurate.
We also often receive requests for repairs because they think their watches are broken.
But don't worry. Although the possibility of failure is not zero, in most cases,Improvements can often be seen with settings.It is.
There are instructions on how to set it up in the manual, but it's hard to understand what to do.
If the time or date is incorrect
The operating procedures differ depending on the manufacturer, but the steps you need to perform are basically the same.
◆Please charge the battery first.If possible, leave it in sunlight for a little longer, about 2 days.
The reason why you need to charge it is because it consumes a lot of power to configure settings.
Please charge the battery first as it may run out of charge during the setup process.
◆Once charging is complete, adjust the date and time reference positions.Reference position for every radio clockThere is.
For example, if this reference position is off by 5 minutes, the time will be off by 5 minutes even if radio waves are successfully received.
Also, even if you manually set the time, it will be off by 5 minutes when receiving radio waves.
The method of adjusting the reference position differs depending on the manufacturer.
Could you please refer to the attached instruction manual?
The standard position of the date on this watch is between 1 and 31.
In addition, the hour and minute hands of this watch automatically set to 12 o'clock, so all you need to do is adjust the reference position of the date.
Depending on the manufacturer and model, the reference position of the needle may also need to be adjusted.
Some watches require a reset to set the reference position.
Japan has a time difference of 9 hours from Greenwich Mean Time, so please set the second hand to "+9".
If you are set to another country's time zone, you will not be able to receive radio waves within Japan.
If the reception is successful, the time should be correct.
If the time does not match, there is a possibility that reception has failed.
Please check whether the reception result is NG.
After receiving the radio wave, it matched perfectly at the exact time.